Emerson Process Management GmbH & Co. OHG5-10
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
5.4.3 Special Messages
Depending on the last action performed by the
user, one of the following messages may be
displayed to assist or inform the user (the two
conrmation messages are displayed only for
a few seconds):
Conrmation of cancellation:
Conrms that a procedure (e.g. calibration)
has been aborted.
(i)
CANCELLED
Conrmation of execution of command:
Conrms that a procedure (e.g. calibration)
has been started.
5.4 Software
Use:
• the UP/DOWN keys to change the cur-
rently selected digit,
Access Code 1
Code 00000001
Back - Press
Entering access codes
If an access code is required for a menu, the
following message is displayed:
Information on incorrect entry:
The value entered by the user is outside
valid limits. The display indicates what limits
apply.
Pressing
8 returns the display to the previous
screen to allow a valid setting to be entered.
Wrong Input
Min: 500
Max: 10.000
Press 8
• the LEFT/RIGHT keys to select a different
digit,
• the ENTER key to submit the code
or
• the MEASURE key to leave edit mode
and return to the previous display.
(i)
-COMMAND EXECUTED-