Emerson Process Management GmbH & Co. OHG 7-43
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
7
Maintenance & Procedures
Fig. 7-9: X-STREAM X2GP
If your instrument is equipped with a handle
• loosen the 6 screws at the front panel,
• to only get access to the cover screws,
push frame and handle about 2 cm / 1"
towards the rear.
Note!
To completely remove frame and handle,
you need to disconnect all gas and electrical
connections and push frame and handle over
the rear panel.
• push the cover towards the rear and re-
move it.
• remove the 4 screws for the cover,
(2 screws on each side of the instrument
7.5.2.2 How to Open X-STREAM X2GK
7.5.2 Opening X-STREAM Analyzers
Fig. 7-10: X-STREAM X2GK
7.5.2.1 How to Open X-STREAM X2GP
Remove the top cover after loosening the 12
screws.
12 screws on top
of the instrument
7.5 Replacing Worn Out Sensors