Emerson Process Management GmbH & Co. OHG 6-57
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
6
Software Menus
6.2.4.5.1 Auto Calibration
Status..
Calibration..
AutoCal in..
6.2 Menu System - Status Menu
ZeroAll 1 h
ZeroAll 15 min
ZSCalAll 1 h
ZSCalAll 15 min
The rst two lines show the remaining time
until the next zero calibration for all channels
is started,
Lines 3 & 4 give the similar information for a
combined zero & span calibration.
Note!
This menu is available only if autocalibration
intervals have been specied (
6.2.3.2.3,
page 6-26).
Note!
In case there is an interval specied for one
procedure only (ZeroAll or ZSCalAll;
6.2.3.2.3, page 6-26), the related lines for the
other procedure will be hidden!.