Filter
Top Products
Emerson Process Management GmbH & Co. OHG 7-59
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
7
Maintenance & Procedures
7.7.2 Restore UserData to CfgData
7.7. Save / Restore Conguration Data Sets
2
nd
menu page
FactData > CfgData..
CfgData > UserData..
UserData > CfgData..
Save-Load
CfgData > SvcPort!
SvcPort > CfgData..
Verify!
1
st
menu page
Setup..
Save-Load..
If system is setup accordingly, access level 3
code must be entered to gain access to this
menu.
Starting at the measurement screen press the
DOWN key to open the MAIN MENU, enter
the SETUP and next the SAVE-LOAD.. menu.
Now select the "UserData>CfgData.." line and
press the ENTER key.
Press the DOWN key to open the second
menu page.
UserData>CfgData
Are you sure?
No!
Yes!
A screen appears to conrm the operation:
Select Yes! and after pressing the ENTER
key a new screen comes up showing the
current status.
(i)
-COMMAND EXECUTED-
The instrument now replaces the currently
used (and changed by operator) analyzer se-
tup by the UserData set. All settings changed
since the UserData was saved, will be over-
written!
When the procedure has nished, the COM-
MAND EXECUTED screen shows up for 2
seconds, followed by...
FactData > CfgData..
CfgData > UserData..
UserData > CfgData..
... the previous menu page. After a few se-
conds the analyzer automatically starts to
reboot.