Filter
Top Products
Emerson Process Management GmbH & Co. OHG 10-1
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
10
Service Information
Chapter 10
Service Information
If factory repair of defective equipment is
required, proceed as follows:
1. Secure a return authorization from a
Rosemount Analytical Sales Ofce or
Representative before returning the
equipment. Equipment must be returned
with complete identication in accordance
with Rosemount instructions or it will not
be accepted.
2. In no event will Rosemount be respon-
sible for equipment without proper autho-
rization and identication.
3. Carefully pack defective unit in a sturdy
box with sufcient shock absorbing mate-
rial to ensure no additional damage will
occur during shipping.
The completed and signed
Declaration of Decontamination
(
A.6, page A-33) must be
included with the instrument
(we recommend to attach it to
the packaging outside)!
4.
In a cover letter, describe completely:
a. The symptoms that determined the equip-
ment is faulty.
b. The environment in which the equipment
was operating (housing, weather, vibra-
tion, dust, etc.).
c. Site from which equipment was re-
moved.
d. Whether warranty service or non-warran-
ty service is requested.
e. Complete shipping instructions for the
return of the equipment.
5. Enclose a cover letter and purchase
order and ship the defective equipment
according to instructions provided in a
Rosemount Return Authorization, pre-
paid, to:
In Europe:
Emerson Process Management
GmbH & Co. OHG
Service Department
Deutschland
+49 6055 884-470/-472
In US:
Emerson Process Management
Rosemount Analytical Inc.
Customer Service Center
1-800-433-6076
1-440-914-1261
In Asia Pacic:
Emerson Process Management
Asia Pacic Pte Limited
Singapore
+65-6-777-8211
If warranty service is expected, the defective
unit will be carefully inspected and tested at
the factory. If failure was due to conditions
listed in the standard Rosemount warranty,
the defective unit will be repaired or replaced
at Rosemount’s option, and an operating unit
will be returned to the customer in accordance
with shipping instructions furnished in the
cover letter.
For equipment no longer under warranty, the
equipment will be repaired at the factory and
returned as directed by the purchase order
and shipping instructions.
10.1 Return Of Material