Filter
Top Products
Emerson Process Management GmbH & Co. OHG6-6
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Cancel calibration!
Start calibration!
Zero gas 0.0 ppm
CO2.1 134.1 ppm
6.2.2.1 Zero Calibration Menu
6.2 Menu System - Control Menu
Page 2
RESET..
Status..
CO2.1 134.1 ppm
Current measured gas concentration.
Note!
For further details on calibration procedures,
see
chapter 7 Maintenance.
Pressing the 8 key in this line will abort the
zero calibration and cancel any changes.
Pressing the
8 key in this line will start the
zero calibration.
Current nominal zero gas concentration (zero
gas concentration can be set in the SETUP
menu
6.2.3.2.1, page 6-24)
Current measured gas concentration.
Page 1
Press the 8 key in this line to view the current
calibration status ( 6.2.2.2.2, page 6-9)
Control..
Zero calibration..
Multi-channel unit:
Select the channel to be calibrated in the
SELECT COMPONENT menu.
Multi-channel unit:
Press the key to enter the SELECT COM-
PONENT menu to change the settings for a
different channel.
Press the
8 key in this line to enter a subme-
nu to reset the calibration parameters (
6.2.2.2.1, page 6-8)