Filter
Top Products
Print Data *Manual Number Revision
Jun. 2008 SH(NA)030038-H Section 1.7.1 (3) (4): Interchanged the model names (3) and (4). Made the function
and configuration be same between MR-J3-200A and MR-J3-
200A4 in comment. Added the "Note 4" at (3).
Section 1.8 (1) (a), (b): Modified the "FR-BLF" to "FR-BSF01".
Section 1.8 (3), (4): Interchanged model names (3) and (4). Made the function and
configuration be same between MR-J3-200A and MR-J3-
200A4 in comment. Added the "Note 4" at (3). Deleted the
"Note 3" at (4).
Section 2.1 (1) (b): At "POINT", changed the "Mounting closely is available for a
combination of servo amplifier of 3.5kW or less in 200V or
100V class." to "Mounting closely is available for the servo
amplifier of 3.5kW or less in 200V or 400W or less in 100V".
Section 3.1 (5) to (8): In drawings, added no-fuse breakers (NFB) at the cables of
cooling fan power supply.
Section 3.3.2 (2): Timing chart is changed.
Section 3.3.3 (2), (3): Interchanged the model names (2) and (3). Made the
function and configuration be same between MR-J3-200A
and MR-J3-200A4 in comment.
Section 3.10.2 (3) (a) 1) to 2): In drawings, added no-fuse breakers (NFB) at the
cables of cooling fan power supply.
Section 10.1 (5), (6): Interchanged the model names (5) and (6). Made the function
and configuration be same between MR-J3-200A and MR-J3-
200A4 in comment. Added the POINT at (5).
Section 11.3.1 (2) (b): Changed the graphs at HA-LP1000r/min and HA-
LP1500r/min in dynamic brake characteristics.
Section 12.1: POINT for protective structure is added.
Section 12.1.1: In use, delete the "2kW" at the upper side in table 2), the "2kW or
less in 400V" at down side.
Section 12.1.2 (3)(a): "Crimping tool 91529-1" is added to table for junction
connector.
Section 12.1.3 (2): Added the "Note".
Section 12.1.4 (2): Added the "Note".
Section 12.2 (5) (a): Changed the tightening torque "3.2" to "3.24".
Section 12.3.3 (4) (a): Changed the sentence.
Section 12.3.4 (2): Errors in dimension notation are corrected.
Section 12.5 (4) (a) 1): Added the "POINT", selection criterion for cable size.
Deleted a sentence "The 600V vinyl cables used is
standard".
Section 12.5 (4) (b) 1): Changed the cross section of cable "5.5 mm
2
" used for the
3.5kW servo amplifier, to "3.5mm
2
" in connection drawing.
Section 12.6 (3) (a): Added the "Note" in table.
Section 12.6 (3) (b): Added the "Note" in table.
Section 12.8 (2) (a): Changed the position of
R
symbol for Windows Vista. RS-
422/232C conversion cable is deleted.
Section 12.8 (2) (b) 3): Changed the connection configuration.
Section 12.11: Changed the "Recommended wires" to "Example of selecting
wires". Added the HIV cable.
Section 12.13: Added the "Note" in table.