App. - 20
A
PPENDI
X
Servo amplifier
Converter
Unit
(Note 3) Wires [mm
2
]
B1 B2 BU BV BW OHS1 OHS2
MR-J3-10A(1) to 40A(1) 60A 70A
MR-J3-100A 200A
MR-J3-350A
(Note 1) MR-J3-500A 16(16)
(Note 1) MR-J3-700A (Note 2) 14(14) (Note 2) 16(16)
(Note 1) MR-J3-11KA
(Note 1) MR-J3-15KA
(Note 1) MR-J3-22KA 14(14) 16(16)
(Note 1) MR-J3-DU30KA
MR-J3-
CR55K
(Note 1) MR-J3-DU37KA
MR-J3-60A4
MR-J3-100A4
MR-J3-200A4
MR-J3-350A4
(Note 1) MR-J3-500A4 16(16)
(Note 1) MR-J3-700A4 (Note 2) 14(14) (Note 2) 16(16)
(Note 1) MR-J3-11KA4
(Note 1) MR-J3-15KA4 14(14)
(Note 1) MR-J3-22KA4
16(16)
(Note 1) MR-J3-DU30KA4
(Note 1) MR-J3-DU37KA4
MR-J3-
CR55K4
16(16)
(Note 1) MR-J3-DU45KA4
(Note 1) MR-J3-DU55KA4
Note 1. To connect these models to a terminal block, be sure to use the screws that come with the terminal block.
2. For the servo motor with a cooling fan.
3. Alphabets in the table indicate crimping tools. Refer to the following table for the crimping terminals and crimping tools.
4. To wire the servo amplifier and a HF-MP
KP servo motor, use the MR-PWS1CBL (option). To extend the wiring, use the
AWG14 wire size.