12 - 73
12. OPTIONS AND AUXILIARY EQUIPMENT
12.9 Battery unit MR-J3BAT
POINT
Refer to appendix 7 and 8 for battery transportation and the new EU Battery
Directive.
(1) Purpose of use for MR-J3BAT
This battery is used to construct an absolute position detection system. Refer to section 14.3 for the fitting
method, etc.
(2) Year and month when MR-J3BAT is manufactured
Production year and month of the MR-J3BAT are indicated in a serial number on the rating plate of the
battery back face.
The year and month of manufacture are indicated by the last one digit of the year and 1 to 9, X(10), Y(11),
Z(12).
For October 2004, the Serial No. is like, "SERIAL
4X ".
MELSERVO
3.6V,2000mAh
SERIAL 4X
MR-J3BAT
MADE IN JAPAN
MITSUBISHI ELECTRIC CORPORATION
The year and month of manufacture