Mitsumi electronic MR-J3- A Air Conditioner User Manual


 
12 - 78
12. OPTIONS AND AUXILIARY EQUIPMENT
(b) When using the 600V Grade heat-resistant polyvinyl chloride insulated wire (HIV wire)
POINT
Refer to the table 12.3 when using the HF-JP series servo motor of 0.5k to 5kW
with the 400
maximum torque setting.
Selection example of wire size when using HIV wires is indicated below. For the wire (8)) for power
regenerative converter (FR-RC-(H)), use the IV wire indicated in (1) (a) in this section.
Table 12.2 Wire size selection example 2 (HIV wire)
Servo amplifier
Wires [mm
2
] (Note 1, 4)
1)
L
1 L2 L3
2) L11 L21
3)
U
V W
4) P C 5) B1 B2
6)
BU
BV BW
7)
OHS1 OHS2
MR-J3-10A(1)
MR-J3-20A(1)
MR-J3-40A(1) 1.25(AWG16)
MR-J3-60A 2(AWG14)
1.25(AWG16)
2(AWG14)
MR-J3-70A
MR-J3-100A 1.25(AWG16)
MR-J3-200A 2(AWG14)
MR-J3-350A 3.5(AWG12) 3.5(AWG12)
MR-J3-500A
(Note 2)
5.5(AWG10): a
1.25(AWG16):
h
5.5(AWG10): a 2(AWG14): g
MR-J3-700A
(Note 2)
8(AWG8): b 8(AWG8): b 2(AWG14): g
1.25(AWG16)
(Note 3)
1.25(AWG16)
(Note 3)
MR-J3-11KA
(Note 2)
14(AWG6): c 14(AWG6): c
3.5(AWG12): j 1.25(AWG16)
MR-J3-15KA
(Note 2)
22(AWG4): d
1.25(AWG16):
g
22(AWG4): d 1.25(AWG16) 1.25(AWG16)
MR-J3-22KA
(Note 2)
38(AWG1): p 38(AWG1): p 5.5(AWG10): k
MR-J3-60A4
1.25(AWG16)
MR-J3-100A4 2(AWG14) 1.25(AWG16) 2(AWG14)
MR-J3-200A4 2(AWG14)
MR-J3-350A4 2(AWG14): g
1.25(AWG16):
h
2(AWG14): g
2(AWG14): g
MR-J3-500A4
(Note 2)
3.5(AWG12): a
3.5(AWG12): a
MR-J3-700A4
(Note 2)
5.5(AWG10): a
1.25(AWG16)
(Note 3)
1.25(AWG16)
(Note 3)
MR-J3-11KA4
(Note 2)
5.5(AWG10): j 8(AWG8): l 2(AWG14): q
MR-J3-15KA4
(Note 2)
8(AWG8): l
1.25(AWG16):
g
14(AWG6): c 3.5(AWG12): j 1.25(AWG16) 1.25(AWG16)
MR-J3-22KA4
(Note 2)
14(AWG6): m 14(AWG6): m 3.5(AWG12): k
Note 1. Alphabets in the table indicate crimping tools. For crimping terminals and applicable tools, refer to (1) (c) in this section.
2. When connecting to the terminal block, be sure to use the screws which are provided with the terminal block.
3. For the servo motor with a cooling fan.
4. Wires are selected based on the highest rated current among combining servo motors.