Filter
Top Products
Print Data *Manual Number Revision
May 2004 SH(NA)030038-B Section 9.1: AL.47 is added.
AL.E8 is added.
Section 9.2: Description of AL.52 is changed.
Section 9.3: Paragraph is added.
AL.E8 is added.
Section 10: Outline drawing is examined.
Section 10.1 (4): Added.
Section 11.1: c. HF-SP152 to 352 is added.
Section 11.2 (1): Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 11.3: HF-SP Series is added.
Section 11.5: Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.1.1: The cable and connector set drawing is added and changed.
Section 12.1.2 (1) (a): The CN2 connector signal allotment drawing is changed.
Section 12.1.2 (4) (5): Added.
Section 12.2 (1) (b): Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.2 (1) (c): MR-RB30 and MR-RB50 are added.
Section 12.2 (5): MR-RB30 and MR-0RB50 are added.
Section 12.4 (2): The free space of the hard disk is changed to 30MB.
Section 12.4 (2) (c): Added.
Section 12.6 (1): Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.6 (2): Cable is added.
Section 12.7: Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.8: Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.9: Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.12 (2) (d): FR-BLF is added.
Section 12.13 (1): Servo amplifiers MR-J3-60A/100A/200A/350A are added.
Section 12.14: HF-3030-UN is added.
Section 14.8.3: Added.
App. 4: Added.
Apr. 2005 SH(NA)030038-C Servo amplifiers MR-J3-500A/700A are added.
Servo motors HF-MP Series HF-SP1000/min Series HF-SP502/702 Series are
added.
Section 1.2 (2): Added.
Section 1.3: Power supply capacity column is deleted.
Input and inrush current columns are added.
Section 1.4: Modified to MRZJW3-SETUP211E.
Brake unit and return converter are added.
Section 1.7: Format is examined.
Section 1.7.1 (3) (4): Added.
Section 1.7.2: Added.
Section 1.8 (3) (4): Added.
Section 2.1 (2): "POINT" is added.
Section 3.1 (1) (2) (3) Titles are examined.
Note 4. is added.
Section 3.1 (4): Added.
Section 3.2.1: Note 12. is added.
Section 3.2.2: Note 12. is added.
Section 3.2.3: Note 10. is added.
Section 3.3.1: "POINT" is added.
Servo amplifier conceptual diagram is deleted.
Regenerative option is separated into each case.
Section 3.3.2 (3): Note is added into the drawing.