Filter
Top Products
1 - 9
1. FUNCTIONS AND CONFIGURATION
1.5 Model code definition
(1) Rating plate
Model
Capacity
Applicable power supply
Serial number
MITSUBISHI
MADE IN JAPAN
MODEL
MR-J3-10A
MITSUBISHI ELECTRIC CORPORATION
AC SERVO
PASSED
POWER :
INPUT :
OUTPUT :
SERIAL :
100W
1.3A 1PH 230V 50/60Hz
170V 0-360Hz 1.1A
A34230001
0.9A 3PH+1PH200-230V 50Hz
3PH+1PH200-230V 60Hz
Rated output current
The year and month of
manufacture (Note)
Note. Production year and month of the servo amplifier are indicated in a serial number on the rating
plate. The year and month of manufacture are indicated by the last one digit of the year and 1
to 9, X(10), Y(11), Z(12).
For September 2009, the Serial No. is like, "SERIAL
99 ".
(2) Model
Regenerative resistor
equipped as standard
Not available
Equipped
Not available
Built-in
regenerative
resistor
Series
Special specification
Servo amplifiers of 11k to
22kW (Except the ones that
support the HF-JP series
servo motors)
HF-JP series
Servo amplifiers dedicated
to the 11kW and 15kW
servo motors
HF-JP series
Servo amplifiers for the
0.5k to 5kW servo motors
that support the 400%
maximum torque setting
Special specificationSymbol
-PX
-LR
-LW
-U1
General purpose interface
Rated output
Power supply
Note 1.
2.
3.
1-phase 200 to 230VAC is supported by
750W or less.
1-phase 100 to 120VAC is supported by
400W or less.
3-phase 380 to 480VAC is supported by
600W and 1kW or more.
(Note 3)
4
3-phase 380 to 480VAC
Symbol
None
(Note 1)
3-phase or 1-phase 200
to 230VAC
(Note 2)
1
1-phase 100 to 120VAC
Power supply
Symbol
Rated output
[kW]
10 0.1
20 0.2
40 0.4
60 0.6
70 0.75
100 1
200 2
350 3.5
500 5
700 7
11K 11
15K 15
22K 22