Filter
Top Products
Caller ID
66 ◆ Features DSX Software Manual
Other Related Features
Features
Call Timer (page 55)
The Auto Timer feature interacts with Caller ID on the first line of the telephone display. If an exten-
sion has Call Timer enabled, the first line (i.e., caller’s name) of the Second Call Caller ID display
won’t show. The user will only see the caller’s number (in the second line).
Call Waiting / Camp-On (page 58) and Off-Hook Signaling (page 255)
• An extension programmed to receive Camp-On tones or Off-Hook Ringing from a waiting call will
also receive Second Call Caller ID.
• If an extension is set up to receive Off Hook Ringing, it will receive Second Call Caller ID for each
new outside call. The display returns to idle when the second call stops ringing.
• If an extension is set up to receive Call Wait beeps, it will receive Second Call Caller ID only for the first
call. This occurs, for example, for DILs and transferred outside calls. With transferred outside calls, the
Second Call Caller ID displays until the call recalls the transferring destination (if not picked up). With
DILs, the Second Call Caller ID displays remains until the extension activates another feature.
Caller ID Logging (page 68)
An extension can store the caller’s name and phone number for easy review and redialing.
Group Ring (page 189)
An extension’s display will show Caller ID data for a line terminated to a Ring Group master number
as the call is ringing.
Station Message Detail Recording (page 328)
Caller ID prints out on the SMDR report.
Voice Mail (page 372)
Caller ID fully integrates with IntraMail, UltraMail and NVM-Series voice mail systems.
IntraMail Features
None