Filter
Top Products
Auto Redial
DSX Software Manual Features ◆ 29
Features
Programming
1. If yes, leave 1602-06: Repeat Redial Timer (page 673) at its current setting.
2. If no, change 1602-06: Repeat Redial Timer (page 673) to meet the site requirements.
1. If yes, leave 1602-07: Repeat Redial Busy Timer (page 673) at its current setting.
2. If no, change 1602-07: Repeat Redial Busy Timer (page 673) to meet the site requirements.
Other Related Features
Features
Last Number Redial (page 219)
Last Number Redial allows an extension user to quickly redial the last outside number dialed.
IntraMail Features
None
Operation
1. Is the interval between Auto Redial callout attempts correctly set?
2. Is the system waiting an adequate time for busy tone when handling an Auto Redial?
Auto Redial
[Super Display Soft Key] - [Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enable Auto Redial:
1.
Place an outside call and receive busy tone.
2.
[Auto Redial]
[Alnd]
Press to enable Auto Redial.
• The system enables Auto Redial for the last outside call you dialed.
You see:
WAITING (30 SEC)
AUTO REDIAL 1 OF 15
The display shows the interval between callout attempts (e.g., 30 seconds), as
well as how many times redial has occurred (e.g., 1 of 15).
• SPEAKER winks when your telephone has Auto Redial enabled.
3.
The system periodically redials the call, up to 15 times.
Auto Redial cancels when you:
• Place or answer another outside call.
• Receive an Intercom voice announcement or answer an Intercom call by lifting the handset or
pressing SPEAKER.
• Press SPEAKER to cancel Auto Redial.
• Lift and replace the handset.
• Press the CANCEL soft key (Super Display only).
If a Caller ID call rings while Auto Redial is enabled, your display will show the number and optional
name of the incoming caller. However, the ringing does not cancel Auto Redial. In addition, the Auto
Redial display will be restored after the Caller ID call stops ringing.