Key Ring
DSX Software Manual Features ◆ 215
Features
Programming
1. If yes:
- In 2132-[01-64]: Line Ringing (page 764) enter one of the following:-
- 1 for day and night ringing
- 2 for night only ringing
- 3 for delayed day and night ringing
- For day mode Key Ring, in 3112-01: Direct Termination in the Day (page 819) press CLEAR.
- For night mode Key Ring, in 3112-04: Direct Termination at Night (page 820) press CLEAR.
- For delayed ringing, adjust 1604-01: Delay Ring Timer (page 678) as required.
2. If no, in 2132-[01-64]: Line Ringing (page 764) enter 0 (lamp only).
1. For day mode Key Ring overflow:
- In 3112-02: Enable Day Overflow (page 819), enter Yes.
- In 3112-03: Day Overflow Destination (page 820) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail Automated Attendant (by entering the voice mail master number)
- A Ring Group master number
- Key Ring (by pressing CLEAR)
2. For night mode Key Ring overflow:
- In 3112-05: Enable Night Overflow (page 820) enter Yes.
- In 3112-06: Night Overflow Destination (page 821) enter the night overflow destination. The desti-
nation can be:
- An extension
- A UCD Group master number
- The voice mail Automated Attendant (by entering the voice mail master number)
- A Ring Group master number
- Key Ring (by pressing CLEAR)
1. In yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.
2. If no, adjust 1601-01: Line No Answer Timer (page 669) as required.
1. In yes, leave 1603-01: Transfer Recall Timer (page 675) at its current setting.
2. If no, adjust 1603-01: Transfer Recall Timer (page 675) as required.
1. Should extension have Key Ring for the outside line?
2. Optionally set up overflow to an alternate destination if the Key Ring line is not answered.
3. Does Key Ring overflow occur after the correct interval?
4. After ringing the overflow destination, does Key Ring occur after the correct interval?