Filter
Top Products
Door Box
150 ◆ Features DSX Software Manual
DSX-40 “Built-In” Door Box Setup
1. Refer to the DSX-40 Hardware Manual for additional details.
- DOOR 1 is extension 326.
- DOOR 2 is extension 327.
1. This programming does not apply to a Door Box connected to a 2PGDAD Module.
2. In 2101-06: Door Relay Assignment (page 723) for DOOR 1 (326) or DOOR 2(327), assign the associ-
ated control relay.
- 1 for relay CPU #1 (normally assigned to DOOR 1/extension 326).
- 2 for relay CPU #2 (normally assigned to DOOR 2/extension 327).
1. In 2101-06: Door Relay Assignment (page 723) for the 2PGDAD Module Door Box extension number,
assign the associated control relay.
- 1 for relay CPU #1.
- 2 for relay CPU #2.
1. If yes, leave 1605-03: Door Relay Unlock Timer (page 680) at its current setting.
2. If no, change 1605-03: Door Relay Unlock Timer (page 680) to meet the site requirements.
Other Related Features
Features
Attendant Position (page 24)
An operator can monitor a Door Box with the following Feature Keys:
- A Call Coverage key for the Door Box Ring Group to monitor ringing.
- A Hotline key for the Door Box extension number to call the Door Box.
Call Coverage Keys (page 40)
If you enter Door Chime type 0 (normal ring) above, you can set up Call Coverage keys for the Door
Box Ring Group. This allows extensions that are not members of the Ring Group to answer Door Box
calls. Extensions with Call Coverage keys to the Door Box Ring Group can also activate the relay.
Call Forwarding (page 44)
An extension user cannot forward a call to a Door Box.
Hotline (page 207)
An extension user can have Hotline keys for Door Boxes.
Message Waiting (page 238)
An extension user cannot leave a Message Waiting at a Door Box.
Paging (page 259)
Door Box chimes 1-3 can broadcast over the External Paging speakers. An extension user can dial
INTERCOM + 0 to answer the chimes and use their soft keys to control the associated relay.
Single Line Telephones (page 305)
Single line telephones can only receive Door Chime type 0 (normal ring). While connected to the
Door Box, an SLT can hookflash to control the system relay.
1. Connect an Analog Door Box (P/N 922450) to a “built-in” Door Box port.
2. Optionally have a “built-in” DSX-40 Door Box activate an associated control relay?
3.
Optionally have a Door Box connected to a 2PGDAD Module activate a DSX-40 relay in tandem
with the 2PGDAD Module relay.
4.
When an extension user activates (closes) to control relay, does it remain closed for the proper
amount of time?