Filter
Top Products
Privacy Release Groups
DSX Software Manual Features ◆ 279
Features
Programming
1. If yes:
- In 2113-04: Privacy Group (page 740), enter the Privacy Release Group number (1-16).
- Make sure the group members have line keys for the lines they want to share.
- In 2131-[01-64]: Line Access (page 763), assign access to the lines group members should share:
- 0 for no access
- 1 for incoming access only
- 2 for outgoing access onl.
- 3 for full access
2. If no:
- In 2113-04: Privacy Group (page 740) enter 0.
Other Related Features
Features
Privacy (page 277)
There is no interaction between Privacy and Privacy Release Groups.
The following features also allow different types of multiple party calls:
• Barge In (Intrusion) (page 36)
• Conference (page 89)
• Group Listen (page 187)
• Meet-Me Conference (page 236)
• Tandem Calls / Unsupervised Conference (page 341)
IntraMail Features
None
Operation
1. Should an extension be in a Privacy Release Group?
Using Privacy Release Groups
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To join an outside call with a member of your Privacy Release group:
1.
Look for the busy line key.
• The busy line key is on (green) at your extension; on (orange) at the co-worker that initially placed or
answered the call.
2.
Press the line key.
• Your line key goes on (green) when you join the call.
• You can also press a line key on your DSS Console.
To prevent a member of you Privacy Release Group from joining your call:
1.
Place or answer an outside call on a line key.
• Your line key goes on (orange)
2.
Press the line key.
• Your line key goes on (green)
3.
Repeat step 2 to allow or prevent users from joining the call.