Filter
Top Products
Central Office Calls, Placing
82 ◆ Features DSX Software Manual
Setting Up Transmit and Receive Gain
1. If yes, leave 3103-01: Transmit Gain (page 814) for the line at it’s current value.
2. If no, in 3103-01: Transmit Gain (page 814) adjust the line’s transmit gain as required.
1. If yes, leave 3103-02: Receive Gain (page 814) for the line at it’s current value.
2. If no, in 3103-02: Receive Gain (page 814) adjust the line’s receive gain as required.
- For a “hot” (high gain) line, decreasing the receive gain should improve Handsfree performance for
keysets using that line.
Setting Up Store and Forward
1. If yes:
- In 3111-05: Store and Forward (page 818), enter
Yes for every line in the Line Group accessed by
Store and Forward.
- When Store and Forward is outdialing on DTMF lines, it uses the following settings:
1111-03: Speed Dial DTMF Tone On (page 608)
1111-04: Speed Dial DTMF Tone Off (page 610)
- When Store and Forward is outdialing on analog Dial Pulse lines, it uses the following settings:
1612-01: DP Break Timer (page 685)
1612-02: DP Make Timer (page 685)
1612-03: DP Interdigit Timer (page 685)
- When Store and Forward is outdialing on T1 Dial Pulse lines, it uses the following settings:
1632-01: Transmit Dial Pulse Break Timer (page 698)
1632-02: Transmit Dial Pulse Make Timer (page 698)
1632-03: Transmit Dial Pulse Interdigit Timer (page 698)
- The setting of 1602-01: Interdigit Timer (page 671) determines the interval the system waits, after
the user has dialed their last digit, before dialing the call on the selected line.
2. If no, in 3111-05: Store and Forward (page 818) enter No.
1.
While on an outside call, is a user’s conversation transmitted to the caller at a comfortable
level?
2. While on an outside call, is the conversation received by the user at a comfortable level?
1. Should the system use Store and Forward when placing outside calls?