Filter
Top Products
Call Waiting / Camp-On
60 ◆ Features DSX Software Manual
Other Related Features
Features
Attendant Position (page 24)
An extension user cannot Camp-On to the attendant because the attendant’s extension is never busy.
Callback (page 61)
If an extension user Camps-On and then hangs up, the system converts the Camp-On to a Callback.
Caller ID (page 63)
An extension programmed to receive Camp-On tones or Off-Hook Ringing from a waiting call will
also receive Second Call Caller ID.
Direct Inward Line (page 109)
DILs to a busy extension automatically send Camp-On tones.
Do Not Disturb (page 143)
An extension cannot Camp-On to a busy co-worker that is also in Do Not Disturb.
Intercom (page 211)
A user can Camp-On after placing an Intercom call to a busy co-worker.
Key Ring (page 214)
A Key Ring call will not send Camp-On beeps to a busy extension that normally rings for that call.
Line Queuing / Line Callback (page 230)
Line Queuing lets an extension user Camp-On to a busy line.
Privacy (page 277)
Privacy blocks Camp-On / Call Waiting.
Split (Alternate) (page 323)
Camp-On lets an extension user know that a call is waiting to be answered. The user can Split between
the waiting call and their current call.
Transfer (page 358)
An extension user can Transfer a call to a busy extension. The call will automatically
Camp-On to the busy extension.
Volume, Brightness, and Contrast Controls (page 388)
The extension user cannot adjust the volume of incoming Camp-On tone.
IntraMail Features
None
Operation
Camp-On to a Busy Extension
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To Camp-On to a busy extension:
1.
Call the busy extension.
• Listen for busy or busy/ring tone.
• With IntraMail installed, you will hear a voice prompt first.
2.
Dial 2 but do not hang up.
• If you hang up, the system converts your Camp-On to a Callback.
3.
When your co-worker hangs up their initial call, you hear:
• Ringback as their telephone rings.
• Your co-worker’s voice when they answer.