NEC N 1093100 Water System User Manual


 
Off-Hook Signaling
256 Features DSX Software Manual
Default Setting
Off-Hook Signaling for outside calls is set for Off-Hook Ringing (option 2) by default. While busy on
a call, the extension will receive Off-Hook Ringing for outside calls that normally ring the phone. This
includes:
- Key Ring calls
- Transferred outside calls
- Direct Inward Lines
- UTRF transfers from voice mail
- Call Coverage keys
- Group Call Pickup keys
Off-Hook Signaling for Intercom calls is Camp-On tones.
Off-Hook Signaling for Intercom calls from the Hotline partner is Camp-On tones.
Programming
1. For Camp-On, in 2116-01: Off Hook Signaling for Incoming Intercom Calls (page 749) enter 1.
2. For Voice Over, in 2116-01: Off Hook Signaling for Incoming Intercom Calls (page 749) enter 2.
3. To disable Off-Hook Signaling, in 2116-01: Off Hook Signaling for Incoming Intercom Calls (page 749)
enter 0.
1. For Camp-On, in 2116-02: Off Hook Signaling for Calls from Hotline Partner (page 749) enter 1.
2. For Voice Over, in 2116-02: Off Hook Signaling for Calls from Hotline Partner (page 749) enter 2.
3. To disable Off-Hook Signaling, in 2116-02: Off Hook Signaling for Calls from Hotline Partner
(page 749) enter 0.
1. For Camp-On, in 2116-03: Off Hook Signaling for Incoming Outside Calls (page 750) enter 1.
2. For ringing, in 2116-03: Off Hook Signaling for Incoming Outside Calls (page 750) enter 2.
3. To disable Off-Hook Signaling, in 2116-03: Off Hook Signaling for Incoming Outside Calls (page 750)
enter 0.
Other Related Features
Features
Attendant Call Queuing (page 22)
The Operator Call key does not activate off-hook signaling.
Caller ID (page 63)
An extension programmed to receive Camp-On tones or Off-Hook Ringing from a waiting call will
also receive Second Call Caller ID.
Conference (page 89)
An extension user can Conference their active call with the waiting call.
Direct Inward Line (page 109)
DILs can initiate Off-Hook Signaling beeps.
Headset Compatibility (page 198)
Turn to Off-Hook Signaling and Headsets (page 199) for more on how Off-Hook Signaling interacts
with headsets.
1. Set up Off-Hook Signaling for waiting Intercom calls.
2.
Specify the type of Off-Hook Signaling available when a user presses the Hotline key for their
busy Hotline partner.
3. Set up Off-Hook Signaling for waiting outside calls.