Filter
Top Products
Group Ring
DSX Software Manual Features ◆ 191
Features
Setting Up Ring Group DILs
1. If yes, in 3112-01: Direct Termination in the Day (page 819) enter the Ring Group master number.
- Use a System Night key to switch a DIL to a Ring Group from day to night mode.
2. If no, in 3112-01: Direct Termination in the Day (page 819) enter a day destination other than a Ring
Group master number.
1. If yes:
- In 3112-02: Enable Day Overflow (page 819) enter Yes.
- In 3112-03: Day Overflow Destination (page 820) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
- Key Ring (by pressing
CLEAR)
2. If no, in 3112-02: Enable Day Overflow (page 819) enter No.
1. If yes, in 3112-04: Direct Termination at Night (page 820) enter the Ring Group master number.
- Use a System Night key to switch a DIL to a Ring Group from day to night mode.
2. If no, in 3112-04: Direct Termination at Night (page 820) enter a day destination other than a Ring
Group master number.
1. If yes:
- In 3112-05: Enable Night Overflow (page 820) enter Yes.
- In 3112-06: Night Overflow Destination (page 821) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
- Key Ring (by pressing CLEAR)
2. If no, in 3112-05: Enable Night Overflow (page 820) enter No.
1. In 2121-[01 to 24]: Feature Key Codes (page 758), to assign the key as a line key enter 03.
2. In 2121-[01 to 24]: Feature Key Data (page 758), enter the line circuit number (1-64).
1. In 2402-[01-60]: DSS Console Key Codes (page 801), to assign the key as a line key enter 03.
2. In 2402-[01-60]: DSS Console Key Data (page 801), enter the line circuit number (1-64).
1. Should a DIL route to a Ring Group during the day?
2. Should overflow occur for a DIL to a Ring Group that is unanswered during the day?
3. Should a DIL route to a Ring Group at night?
4. Should overflow occur for a DIL to a Ring Group that is unanswered at night?
5. Be sure the DIL destination extension has a line key for the DIL.
6. Optionally set up a line key for the DIL on a DSS Console.