NEC N 1093100 Water System User Manual


 
Message Waiting
DSX Software Manual Features 239
Features
Programming
1. If yes, in 4101-01: Voice Mail Type (page 863) enter 0.
- The system can have either Message Waiting or voice mail, not both.
1. If no, in 4101-01: Voice Mail Type (page 863) enter on of the following:
- 1 for Built-In Automated Attendant
- 2 for IntraMail
- 3 for UltraMail (DSX-80/160 only)
- 4 for external
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, in 1403-03: Special Dial Tone for Single Line Set (page 635) enter Yes.
3. If no, in 1403-03: Special Dial Tone for Single Line Set (page 635) enter No.
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, in 1403-04: High Voltage Message Waiting Lamp for Single Line Set (page 636) enter Yes.
- If both high voltage and FSK Message Waiting are enabled, the system uses FSK.
3. If no, in 1403-04: High Voltage Message Waiting Lamp for Single Line Set (page 636) enter No.
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, in 1403-05: FSK Message Waiting Lamp for Single Line Set (page 636) enter Yes.
- If both high voltage and FSK Message Waiting are enabled, the system uses FSK.
3. If no, in 1403-05: FSK Message Waiting Lamp for Single Line Set (page 636) enter No.
Other Related Features
Features
Call Forwarding (page 44)
An extension user cannot leave a Message Waiting at an co-worker that has Call Forwarding Immediate
(*34) enabled. Pressing
V-MAIL
automatically leaves a message at the forwarding destination instead.
An extension user cannot leave a Message Waiting at a busy co-worker that has Call Forwarding
Busy/No Answer (*32) enabled. Pressing V-MAIL automatically leaves a message at the forwarding
destination instead.
Do Not Disturb (page 143)
An extension user can leave a Message Waiting at an extension in Do Not Disturb.
Intercom (page 211)
A user can leave a Message Waiting after placing an Intercom call to a busy co-worker.
Voice Mail (page 372)
A system can have either voice mail or Message Waiting activated — not both.
Voice Over (page 385)
An extension user cannot leave a Message Waiting after using Voice Over.
IntraMail Features
None
1. Should the system have Message Waiting capability?
2. Should a single line set have special dial tone when a it has a message waiting left?
3. Should a single line set have high voltage Message Waiting (DSX-80/160 only)?
4. Should a single line set have FSK Message Waiting?