Filter
Top Products
Line Keys
228 ◆ Features DSX Software Manual
Programming
1. To set up a line key on an extension:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 03.
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the line number (1-64).
2. To set up a line key on a DSS Console:
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter 03.
- In 2402-[01-60]: DSS Console Key Data (page 801), enter the line number (1-64).
3. In 2111-05: Key Access for Outside Lines (page 732), enter Yes.
- This option does not restrict loop keys.
1. In 2131-[01-64]: Line Access (page 763), enter one of the following:
-
1 for incoming access only
-
2 for outgoing access only
- 3 for full access
1. If yes:
- In 2132-[01-64]: Line Ringing (page 764) enter the ring type:
1 for day and night ringing
2 for night ringing only
3 for delay ringing day and night
- For delay ringing (option 4 only), in 1604-01: Delay Ring Timer (page 678) adjust the Delay Ring
timer as required.
2. If no:
- In 2132-[01-64]: Line Ringing (page 764) 0 (lamp only - no ringing).
Other Related Features
Features
Automatic Handsfree (page 30)
Automatic Handsfree allows the keyset user to answer a call ringing a line key without lifting the
handset; they just press the line key instead.
Central Office Calls, Placing (page 78)
Line Keys give a user one-touch access to specific lines.
Direct Inward Line (page 109)
When you assign a line as a DIL, it continues to flash its previously programmed line/loop key assign-
ments. It will ring line/loop keys only after diverting to Key Ring.
Distinctive Ringing (page 135)
By using Key Ring Override, Distinctive Ringing allows an extension user to set up unique ringing for
their line keys.
Loop Keys (page 233)
Loop keys also provide one-button access to lines.
Ringing Line Preference (page 295)
Ringing Line Preference allows an extension user to answer a call ringing a line key just by lifting
the handset.
IntraMail Features
None
1. Set up line keys for the extension or DSS Console.
2. Set the access for the line assigned to the line key.
3. Should the line key ring for incoming calls?