Filter
Top Products
42xx-IntraMail
420x-Options
4202-Notification (Message Notification Options)
DSX Software Manual Voice Mail Options: 4101-4231 ◆ 877
Voice Mail
4101-4231
4202-07: Send Pager Callout Until Acknowledged
(Pager Retry Until ACK)
When this option is enabled, IntraMail will continue to retry a digital pager Message Notification callout
until the notification is acknowledged. If this option is disabled, IntraMail will retry a digital pager Message
Notification the number of time specified in 4202-06: Number of Callout Attempts. This option does not
apply to Message Notification callouts to telephone numbers.
A digital pager notification is considered acknowledged when the recipient logs onto the mailbox.
Features
• None
IntraMail Features
• Message Notification (page 535)
Options
• No (0) - Disabled
•
Yes (1) - Enabled
Default
• No (0) - Disabled
4202-08: Digital Pager Callback Number
(Pager Callback Number)
Use this option to set the Digital Pager Callback Number portion of the Message Notification callout num-
ber for a digital pager. This is the portion of the callout number that is appended to the pager service tele-
phone number. Normally, this option should be X*M#, where:
- X is the number of the extension that generated the notification.
- * is a visual delimiter (to make the pager display easier to read).
- M is the number of new messages in the extension’s mailbox.
- # is the digit normally used by the pager service for positive disconnect.
Features
• None
IntraMail Features
• Message Notification (page 535)
Options
• Digits, 12 maximum, using 0-9, # and *
•
M for number of messages
• N for none
• X for extension number
IntraMail automatically replaces the X command with the number of the extension that initially
received the message.
Default
• X*M#
4202-09: Delay in Dialing Digital Pager Callback Number
(Pager Dial Delay)
Use this option to set the delay that occurs just before IntraMail dials the Digital Pager Callback Number
portion of the Message Notification callout number for a digital pager. Set this delay so the pager service has
enough time to connect to the digital pager before sending the callback number. Your pager service may be
able to help you determine the best value for this option. When placing a digital pager notification, the sys-
tem:
1. Seizes the line specified.
2. Dials the user-entered notification number (in V-MAIL + OP + N).
3. Waits the 4202-09: Delay in Dialing Digital Pager Callback Number.