Filter
Top Products
Distinctive Ringing
DSX Software Manual Features ◆ 137
Features
Conditions
• None
Default Setting
• Outside lines, Ring Groups, and UCD Groups use Type A ringing.
• The ASSIGN (ASGN) and KEY soft keys are disabled.
• The CONFIG (CNFG) soft keys is enabled.
Programming
1. Enable the CONFIG (CNFG) soft keys.
- In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
- In 1405-01: Ring Type Configuration (page 641), enter Yes.
System Programming
2. To set up Distinctive Ring Configuration:
-To set the ring tone and cadence for Intercom ringing, use:
- 2103-04: Station’s Intercom Ring Tone (page 727).
-To set the ring tone and cadence for Ring Group ringing, use:
- 2103-05: Station’s Ring Group Ring Tone (page 727).
-To set the ring tone and cadence for recall ringing,
- 2103-06: Station’s Recall Ring Tone (page 727).
-To set the ring tone and cadence for ring tone A, use:
- 2103-07: Station’s Ring “A” Tone (page 728).
-To set the ring tone and cadence for ring tone B, use:
- 2103-08: Station’s Ring “B” Tone (page 728)
-To set the ring tone and cadence for ring tone C, use:
- 2103-09: Station’s Ring “C” Tone (page 728)
Soft Keys
3. To set up Distinctive Ring Configuration:
- Turn to Distinctive Ring Configuration (page 140) to set this up.
- This allows you to select new tones and/or cadences for the Ring Types you want to customize.
System Programming
1. Set up Line Override using the following:
- In 3113-02: Day Ring Type (page 822), enter the day ring type
(
1=Type A, 2=Type B, 3=Type C).
- In 3113-03: Night Ring Type (page 823), enter the night ring type
(
1=Type A, 2=Type B, 3=Type C).
- In 3113-04: Delay Ring Type (page 824), enter the delay ring type
(
1=Type A, 2=Type B, 3=Type C).
Soft Keys
2. You cannot set up line override using an extension’s soft keys.
1. Setting up Distinctive Ring Configuration.
2. Setting up Line Override (Distinctive Ringing by Line and Ringing Mode).