Filter
Top Products
Hold
DSX Software Manual Features ◆ 203
Features
Hold Recall Display
The Hold recall display identifies:
❥ The type of call recalling the extension.
❥ The extension which initially placed the call on Hold.
The Hold recall displays occurs as the call is ringing the extension that initially placed it on Hold, and after
the call diverts to Key Ring.
Conditions
• None
Default Setting
• System Hold, Exclusive Hold and Automatic Hold enabled.
Programming
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, 1411-03: Automatic Hold (page 647) enter Yes.
3. If no, in 1411-03: Automatic Hold (page 647) enter No.
1. If yes, leave 1603-02: Hold Recall Timer (page 675) at its current setting.
2. If no, adjust 1603-02: Hold Recall Timer (page 675) as required.
1. If yes, leave 1603-03: Exclusive Hold Recall Timer (page 675) at its current setting.
2. If no, adjust 1603-03: Exclusive Hold Recall Timer (page 675) as required.
1. If yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.
2. If no, adjust 1601-01: Line No Answer Timer (page 669) as required.
1.
While busy on a call, should pressing a line key or Call Coverage key put the initial call on
Hold?
2.
Does an unanswered call on System Hold recall the extension that placed it on Hold after the
desired interval?
3.
Does an unanswered call on Exclusive Hold recall the extension that placed it on Hold after the
desired interval?
3. Does an unanswered Hold recall divert to Key Ring after the desired interval?