Filter
Top Products
Account Codes
DSX Software Manual Features ◆ 19
Features
Other Related Features
Features
Central Office Calls, Placing (page 78)
• You can use Store and Forward with Forced Account Codes.
Last Number Redial (page 219) and Save Number Dialed (page 298)
• Last Number Redial and Save do not store Account Codes. This means that the user must manually
enter an Account Code to have it included with a call redialed using Last Number Redial and Save.
Speed Dial (page 315)
• An extension user can store an Account Code in a Speed Dial bin. See Using Account Codes and
Speed Dial (page 14) for more.
Station Message Detail Recording (page 328)
• Account Codes print on the SMDR report.
Voice Mail (page 372)
• Voice mail callout features (such as Message Notification) may interact with Account Codes if the
callout number contains # characters.
IntraMail Features
None
Operation
Optional (Unforced) Account Codes
[Super Display Soft Key] - [Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
• For keysets, Optional Account Codes apply to both incoming and outgoing calls. For outgoing calls, you can enter the
Account Code before or after dialing the outside number.
• For Single Line sets, Optional Account Codes apply only to outgoing calls. You must enter the Account Code after get-
ting dial tone on the line but before dialing the outside number.
To enter an Optional (Unforced) Account Code:
1.
Place or Answer outside call.
2.
[Acct Code]
[Acct]
Press Account Code soft key.
• You can optionally press an Account Code Feature Key or dial # (if enabled).
3.
When you see Enter Account Code, enter Account Code.
• An Account Code can be up to 10 digits long, using the digits 0-9.
4.
[Acct Code]
[Acct]
Press Account Code soft key.
• You can optionally press an Account Code Feature Key or dial # (if enabled).
5.
For outside calls only:
a.
Dial your outside number.
• Toll Restriction may still prevent you from dialing certain outside numbers.