16xx-Timers
160x-Feature Timers
1602-Outgoing Call Timers
DSX Software Manual System Options: 1001-1702 ◆ 673
System
1001-1702
1602-04: Dial Pause Timer
(Interdigit Time)
Use this option to set the length of a pause stored in a Speed Dial bin.
Features
• Speed Dial (page 315)
IntraMail Features
• Centrex Transfer (page 460)
Options
• 1-9999 seconds
• 0 for disabled
Default
• 1 second
1602-05: CO Busy Out Timer
(CO Busy Out)
Use this option to set the guard time for lines. When the system disconnects a line (e.g., after a user hang
up), the system keeps the line idle until this timer expires. The CO Busy Out timer helps prevent call colli-
sions. If you set this interval too short, call collisions may occur. If too long, there will be unnecessary delays
before you can use the line for a new call.
F
eatures
• None
IntraMail Features
• None
Options
• 10-9999 mS
Default
• 10 mS
1602-06: Repeat Redial Timer
(Repeat Dial)
Use this option to set the interval between Auto Redial callout attempts.
Features
• Auto Redial (page 28)
Intr
aMail Features
• None
Options
• 1-99 seconds
Default
• 30
1602-07: Repeat Redial Busy Timer
(Repeat Busy)
Use this option to set how long the system waits for busy tone when processing an Auto Redial callout
attempt. The interval is measured from the last digit dialed to the receipt of busy tone. If the system doesn’t
receive busy tone within this interval, it assumes that the call went through and cancels Auto Redial.
Features
• Auto Redial (page 28)