Filter
Top Products
Night Service / Night Ring
DSX Software Manual Features ◆ 253
Features
Option 4: DIL Day and Night
The line is a DIL during the day and at night. The DIL destination’s DND key controls the night mode of the
line. Turn to Direct Inward Line (page 109) for more on setting up Direct Inward Lines.
Conditions
• None.
Default Setting
• In DSX-40, keys 1-12 are day/night ringing line keys for lines 1-12 and keys 13-24 are undefined.
• In DSX-80/160, keys 1-8 are day/night ringing line keys for lines 1-8 and keys 9-24 are undefined.
• For attendants:
- Key 12 (on 22-button) or key 24 (on 34-button) is an Operator Call Key.
Programming
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, in 1402-05: Activate Night Mode (page 634) enter Yes.
- This capability is normally reserved only for attendants.
3. If no, in 1402-05: Activate Night Mode (page 634) enter No.
1. To set up a System night key on an extension:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 18.
- In 2121-[01 to 24]: Feature Key Data (page 758), press CLEAR.
2. To set up a System night key on a DSS Console:
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter 18.
- In 2402-[01-60]: DSS Console Key Data (page 801), press CLEAR.
1. If yes:
- In 2132-[01-64]: Line Ringing (page 764) enter one of the following:
1 for day and night ringing.
2 for night ringing only.
3 for delay ringing day and night.
- For delay ringing (option 4 only), in 1604-01: Delay Ring Timer (page 678) adjust the Delay Ring
timer as required.
2. If no:
- In 2132-[01-64]: Line Ringing (page 764) enter 0 for lamp only (no ringing).
1. Should extension be able to put Key Ring lines into the Night Mode?
2. Set up a System night key on an extension or DSS Console.
3. Should key ring lines ring extensions at night?