Filter
Top Products
2-67
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
snmp-server
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
The snmp-server contact string appears when you view system version or SNMP information.
The snmp-server host string appears in the
show snmp
command output.
The
host
keyword configures the IP address of the host that you want to receive traps.
Note SNMPv3 configurations are not portable across Server Switches. You must configure SNMPv3
individually on each chassis. If you migrate a configuration file from one chassis to another, the
SNMPv3 section does not appear.
privileges Privileges to apply to the user. The privileges may be any combination of
the following:
• ib-ro
• ib-rw
• ip-ethernet-ro
• ip-ethernet-rw
• fc-ro
• fc-rw
• unrestricted-rw
You must enter whichever privileges you include in the order in which they
appear above.
v3 Configures a user with the SNMPv3 security model.
encrypted (Optional) Specifies passwords as digests
auth Configures authentication parameters for the user.
md5 Specifies md5 authentication.
sha Specifies sha authentication.
password Authentication password to assign to the user.
priv (Optional) Configures privacy for the user and assigns a privacy password.
des56 (Optional) Configures the privacy type.
privacy Privacy password.