Filter
Top Products
2-78
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
type
type
To assign an administrative card-type to a slot into which you want to install a card, enter the
type
command in Card Configuration submode.
type
card-type
Syntax Description
Defaults This command has no default settings.
Command Modes Configuration Card (config-card) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Use the
type
command to reserve slots for particular card types. For instance, if you want a slot to run
only Fibre Channel gateway cards, configure the type of the slot to “fc2port2G” so that only that card
type will function in the slot. Any other card that you place in the slot will not function. Table 2-3 lists
and describes available card types.
card-type Type of card in the slot. See Table 2-3 for available card types.
Tab le 2- 3 Card Typ es
Type Description
controller Configures the slot for a Cisco SFS 3012 controller card.
controllerIb12port4x Configures the slot for a Cisco SFS 3001 controller card with 12 4x
InfiniBand ports.
controllerIb24port4x Configures the slot for a Cisco SFS 7000 controller card with 24 4x
InfiniBand ports.
en4port1G Configures the slot for a 4-port, 1Gbps Ethernet gateway.
en6port1G Configures the slot for a 6-port, 1Gbps Ethernet gateway.
fabric12x Configures a slot in a Cisco SFS 7008 for a fabric controller module
(FCM).
fc2port2G Configures the slot for a 2-port, 2Gbps Fibre Channel gateway.
fc4port2G Configures the slot for a 4-port, 2Gbps Fibre Channel gateway.
ib12port4x Configures the slot for a 12-port, 4X InfiniBand switch card.
ib12port4xTX Configures a slot in a Cisco SFS 7008 for a line interface module (LIM)
with twelve 4x InfiniBand ports.