Filter
Top Products
3-17
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 3 Fibre Channel Commands
fc srp target
fc srp target
To configure targets, enter the
fc srp target
command in Global Configuration mode. To delete a target
from the running configuration, use the
no
form of this command.
fc srp target
wwpn {
description
desc |
ioc-guid
guid}
no fc srp target
wwpn [
description
|
service-name
]
Syntax Description
Defaults The service name serves as the default target name.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
Use the
fc srp target
command to configure target attributes.
We recommend that you allow your gateway cards to detect targets. We recommend that you let your
gateway card(s) detect targets. A gateway card automatically creates FC-SRP target entries when it
discovers targets.
Examples The following example assigns a name to identify the target easily:
SFS-7000P(config)# fc srp target 21:00:00:04:cf:75:6b:3b description jumbalya
Related Commands fc srp itl
show interface fc
show fc srp initiator
wwpn World-wide port name (WWPN) of the target port.
description (Optional) Applies a text description to the target port.
desc Description to apply to the target port.
ioc-guid Manually assigns an I/O Controller (IOC) to the target.
guid GUID of the IOC to assign to the target.
service-name (Optional) Configures the service name of the target to an empty string.