Cisco Systems 7000 Plumbing Product User Manual


 
6-175
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface ib
Examples The following example shows the output of the
show interface ib
command without the
sma
or
statistics
keywords:
SFS-270# show interface ib 4/7
================================================================================
InfiniBand Interface Information
================================================================================
port : 1
name : 1
type : ib4xTXP
desc : 1 (65)
last-change : none
mtu : 0
auto-negotiate-supported : yes
auto-negotiate : disabled
admin-status : up
oper-status : down
admin-speed : 10gbps
oper-speed : unknown
link-trap : enabled
phy-state : polling
dongle-type : ib4xFX
out-multicast-pkts Total number of packets that higher-level protocols requested be transmitted and
that were addressed to a multicast address at this sub-layer, including those that
were discarded or not sent.
out-broadcast-pkts Total number of packets that higher-level protocols requested to be transmitted
and that were addressed to a broadcast address at this sub-layer, including those
that were discarded or not sent.
out-discards Number of outbound packets that were chosen to be discarded even though no
errors had been detected to prevent their being transmitted. One possible reason
for discarding such a packet could be to free-up buffer space.
out-errors For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors. For character-oriented or fixed-length interfaces,
the number of outbound transmission units that could not be transmitted because
of errors.
Table 6-73 statistics Keyword Output Field Descriptions (continued)
Field Description