Filter
Top Products
6-169
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface ib
The administrative (admin) status, speed, and connection-type reflect the values you had assigned. The
operational (oper) status, speed, and connection-type reflect the values derived from the physical
hardware and its connections. This allows you to verify your configuration settings against the actual
hardware. The admin/oper pairs do not have to match for you to use the card. However, if there is a
mismatch, the oper value is used.
Table 6-70 describes the fields that appear when you use the
sma node-info
argument with the
show
interface ib
command.
Table 6-71 describes the fields that appear when you use the
sma port-info
argument with the
show
interface ib
command.
link-trap Indicates if connection link errors are to be
captured and sent to trap recipients. The value may
be either enabled or disabled. This field is set by
the
link-trap
command.
dongle-type Displays the port power connector dongle type
variable.
Table 6-69 show interface ib Command Field Descriptions (continued)
Field Description
Table 6-70 sma node-info Keyword Output Field Descriptions
Field Description
guid GUID of the host.
type Type of SMA node. This value always appears as switch.
lid Base Local Identifier (LID) of the port.
base-version Base management datagram version that the switch supports.
class-version Subnet management class that the switch supports.
port-guid GUID of the ports that you specified with the port-selection variable.
partition-cap Maximum number of partitions that the port supports.
device-id Manufacturer-assigned device ID.
revision Manufacturer-assigned device revision.
local-port-num Number of the link port that received this show request.
vendor-id Device vendor ID, as per the IEEE standard.
trap-buffer Special purpose string buffer for InfiniBand Trap Data.
num-ports Number of physical ports on the SMA node.
string SMA node description string.
Table 6-71 sma port-info Keyword Output Field Descriptions
Field Description
node-guid GUID of the InfiniBand host that connects to the port.
port Host port that connects to your Server Switch.