Filter
Top Products
6-86
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib pm connection monitor
show ib pm connection monitor
'To view the state of a performance monitored connection, enter the show ib pm connection monitor
command in User Execute mode or Privileged Execute mode.
show ib pm connection monitor subnet-prefix
prefix
src-lid
source
dst-lid
destination
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output Description:
subnet-prefix Specifies the subnet prefix of the InfiniBand subnet for which you want to
view performance monitoring.
prefix Subnet prefix of the InfiniBand subnet for which you want to view
performance monitoring
src-lid Specifies the source Local Identifier (LID) of the connection.
source Source LID of the connection
dst-lid Specifies the destination LID of the connection.
destination Destination LID of the connection.
subnet-prefix Subnet to which the monitored connection belongs
src-lid 16-bit source LID of the connection
dst-lid 16-bit destination LID of the connection
error-status Error threshold status. If any of the ports in the connection have exceeded a
user-defined error threshold, the error-status will be exceeded.
util-status Utilization threshold status. If any of the ports in the connection have exceeded a
user-defined utilization rate threshold, the error-status will be exceeded.