Filter
Top Products
6-193
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show power-supply
show power-supply
To display the status of the power supplies on your Server Switch, enter the
show power-supply
command in User Exec mode or Privileged Exec mode.
show power-supply
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
General read-only user.
Use this command to monitor the power supply. This command primarily serves to help management
tools continuously monitor power supply status. Errors in the ts_log file may prompt you to check power
supply status. Table 6-78 describes the power-supply fields.
Table 6-78 show power-supply Command Field Descriptions
Field Description
type Indicates AC power.
oper-status Displays “up” or “down” to indicate the status of the power supply.
utilization Displays percentage of power utilization when multiple power supplies
provide power. Displays “n/a” when one power supply runs.
voltage Voltage of the power supply.
product serial-number Factory-assigned product serial number.
pca serial-number Printed circuit assembly (PCA) serial number.
pca number Printed Circuit Assembly (PCA) assembly number.
fru number Field replaceable unit (FRU) number for the actual switch (select chassis) or
chassis (select chassis).