Cisco Systems 7000 Plumbing Product User Manual


 
5-4
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 5 IP Commands
bridge-group
Command Modes Global Configuration (config) mode, Ethernet Interface Configuration (config-if-ether) submode,
Gateway Interface Configuration (config-if-gw) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-write user.
Create bridge-groups to associate specific Ethernet gateway ports with Ethernet switch ports. Bridge
Groups are used to associate the InfiniBand fabric with an Ethernet subnet.
Examples The following example creates a bridge group and uses auto-detect to discover all available subnets:
SFS-7000P(config)# bridge-group 61
The following example assigns a subnet prefix to a bridge group:
SFS-7000P(config)# bridge-group 61 subnet-prefix 61.0.0.0 16
The following example disables multicast forwarding for a bridge-group:
SFS-7000P(config)# no bridge-group 61 multicast
The following example assigns bridge group 62 to the Ethernet interface slot 6, port 2:
SFS-7000P(config-if-ether-6/2)# bridge-group 62
The following example assigns bridge group 62 to the internal gateway interface slot 6, ports 1 and 2:
SFS-7000P(config-if-gw-6)# bridge-group 62
The following example assigns a bridge group to a redundancy group and configures the failover priority
of the bridge group:
SFS-7000P(config)# bridge-group 11 redundancy-group 11 fail-over-priority 10
Related Commands config TACACS-server host
redundancy-group
show bridge-group