Filter
Top Products
2-3
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
action
action
To execute predefined administrative functions on expansion modules (gateway cards), enter the
action
command in Card Configuration submode.
action {delete-inactive-image | reset}
Syntax Description
Command Modes Card Configuration (config-card) mode.
Defaults This command has no default settings.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Currently, you can execute only one predefined administrative function on all platforms except the Cisco
SFS 7008. The function (delete-inactive-image) deletes inactive images from one or more cards to
provide more available memory on the card.
Before you use the
action
command with the
delete-inactive-images
keyword, enter the
boot-config
command with the
primary-image-source
keyword to install and activate the proper
image on the card. When you execute this command, the previously-active image becomes inactive. You
can now execute the
action
command to clear the inactive image from your card.
To execute this command, you must have read-write administrative permission for the type(s) of card(s)
that you want to clear.
Examples The following example deletes inactive images from the card that resides in slot 2:
SFS-7000P(config-card-2)# action delete-inactive-images
The following example resets a management I/O card on a Cisco SFS 7008:
SFS-270(config-card-15)# action reset
delete-inactive-image Removes the inactive image from interface cards. Use the
action
command
with the
delete-inactive-image
keyword after the
boot-config
command
when you upgrade the system image on your Server Switch to clear the
inactive image from the card(s) after a reboot.
reset Resets the card(s) that you specify in a Cisco SFS 7008.