Filter
Top Products
6-28
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show cdp neighbors
show cdp neighbors
To display the information for neighbors CDP has discovered, enter the
show cdp neighbors
command
in User Exec mode or Privileged Exec mode.
show cdp neighbors [type number] [detail]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Examples The following example displays the CDP neighbors information:
SFS-7000P# show cdp neighbors
================================================================================
CDP neighbors
================================================================================
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
device-id hold-time capability platform port-id
--------------------------------------------------------------------------------
svbu-q8-c2950.svbu-q8-c2950.cisco.com²(- 180 S cisco WS-C2950T-24
FastEthernet0/4-24
Related Commands show cdp
show cdp entry
show clock
type number (Optional) Displays the type of device discovered, the device name, the
number and type of the local interface (port), the number of seconds the
CDP advertisement is valid for the port, the device type, the device product
number, and the port ID.
detail (Optional) Displays information about the native VLAN ID, the duplex
mode, and the VTP domain name associated with the neighbor device.