Filter
Top Products
3-7
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 3 Fibre Channel Commands
fc srp it
fc srp it
To configure an initiator-target (IT) pair—a fully-configured link between an initiator and a target
storage device port—with your Server Switch, enter the
fc srp it
command in Global Configuration
mode. To delete or reconfigure an IT pair entry from the configuration file, use the
no
form of this
command.
fc srp it
guid extension wwpn {
description
“
descr
”
|
discover-itl
|
gateway-portmask-policy
{
default
|
test-mode
|
restricted
port-selection}}
no fc srp it
guid extension wwpn [
test-mode
|
gateway-portmask-policy
restricted
port-selection]
Syntax Description
Defaults By default, this policy denies initiators access to all targets.
guid Global unique identifier (GUID) of the initiator.
extension GUID extension of the initiator.
wwpn World-wide port name (WWPN) of the target port of the FC storage device.
description Assigns a description to the initiator-target pair.
descr Alphanumeric description to assign to the initiator target.
discover-itl Discovers initiator-target-LUN (ITL) groups for the specified target and
adds them to the configuration file. For detailed information on ITLs, refer
to the Fibre Channel Gateway User Guide.
gateway-portmask-
policy
(Optional) Designates the physical FC gateway ports that the initiator can
use to access the storage port. When you add FC gateway ports to the policy,
the initiator cannot use those ports to access the storage. When you use the
no
keyword to remove FC gateway ports from the policy, the initiator can
access the storage through those ports.
default Assigns the global gateway portmask policy to the IT. To view your default
policy, enter the
show fc srp-global
command (in User Exec mode or
Privileged Exec mode) and view the default-gateway-portmask-policy
field.
restricted (Optional) Denies the initiator access to the ports that you specify with the
port-selection variable. Use the
no
form of the command to add ports to the
policy to grant the initiator access.
port-selection (Optional) Port, list of ports, or range of ports to which you grant or deny the
initiator access.
test-mode (Optional) Sets an inactive initiator-target pairing to test mode, which
configures the FC gateway to log in to storage persistently and block log-ins
from SRP hosts (initiators). Use test mode as you set up your Fibre Channel
connections, then use the no form of the command to return to normal mode.
Note You cannot configure an active IT to test mode. Active ITs must
remain in normal mode.
Note A test-mode configuration does not persist across reboots.