Filter
Top Products
2-47
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
location
location
To assign a text-based location identifier to your Server Switch, enter the
location
command in Global
Configuration mode. To reset the location to an empty string, use the
no
form of this command.
location
“
string
”
no location
Syntax Description
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Use the
location
command to assign a readable identifier to your Server Switch. Use the location string
to identify support providers, the Server Switch owner, the Server Switch itself, or the physical location
of the Server Switch. Display the location with the
show location
command.
Note The
location
command configures the same parameter that the
snmp-server
command configures
with the
location
and location-string arguments.
Examples The following example assigns a location to the Server Switch:
SFS-7000P(config)# location "515 Ellis Street, Mountain View, CA 94043"
Related Commands snmp-server
show location
show version
string Refers to an ASCII text string. Enclose multi-word strings within
double-quotes (“,”).