Cisco Systems 7000 Plumbing Product User Manual


 
6-134
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib-agent channel-adapter
show ib-agent channel-adapter
'To view the attributes of InfiniBand agents for channel adapters (gateways and controllers) on your
Server Switch, enter the show ib-agent channel-adapter command in Privileged Exec mode or User
Exec mode.
show ib-agent channel-adapter
node-info
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Each system channel adapter runs its own subnet-management agent.
Command Output:
Table 6-47 describes the fields in the
show ib-agent channel-adapter
command output.
node-info InfiniBand information for the channel adapter (CA).
Table 6-47 show ib-agent channel-adapter Command Field Descriptions
Field Description
guid Globally unique identifier of the CA as an 8-byte string.
type Type of device this SMA supports. The field always displays “adapter.”
lid LID of the channel-adapter port.
base-version Supported base management datagram version supported.
class-version Supported subnet-management class.
port-guid Globally unique identifier of the node port.
partition-cap Number of entries in the partition table for channelAdapter, router, and switch
management ports. This displays, at a minimum, 1 for all nodes including switches.
device-id Device ID information, as assigned by the device manufacturer.
revision Device revision, as assigned by the device manufacturer.
local-port-num Number of the link port which received this request; otherwise, the field displays 0.
vendor-id Device vendor, per the IEEE standard.