Filter
Top Products
6-48
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic power-supply
show diagnostic power-supply
To display completed or ongoing diagnostic tests for power supplies, enter the
show diagnostic power-supply
command in User Exec mode or Privileged Exec mode.
show diagnostic power-supply {all | power-supply-selection}
Syntax Description
Defaults This command has no default settings.
Command Modes: User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 7000, Cisco SFS 7008
Privilege Level:
Unrestricted read-write user.
Command Output:
Table 6-11 describes the fields in the
show diagnostic power-supply
command.
all Specifies all fans on the Server Switch.
power-supply-selection Power supply or supplies with the tests that you want to view.
Table 6-17 show diagnostic card Command Field Descriptions
Field Description
module-number Power supply module number.
test Test that ran or runs on the card.
iterations Number of iterations that the test completed.
action Last action that an administrator applied to the test.
result Result of the last action that an administrator applied to the test.
percentage-completed Percentage of the test that has executed
result-string Diagnostic test results.