Filter
Top Products
2-12
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
card
card
To enter Card Configuration submode, enter the
card
command in Global Configuration mode.
card
{slot-list | all | digit | digit,digit | digit-digit}
Syntax Description
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Card-specific read-write user
Enter Card Configuration submode to enable, disable, configure, and reinitialize cards in your Server
Switch.
Examples The following example enters Card Configuration submode for all cards on the Server Switch. Any
commands that execute in this mode apply to all of the cards in the chassis.
SFS-7000P(config)# card all
SFS-7000P(config-card-1,6,11,15-16)#
Related Commands clock set
delete
install
show card
show card-inventory
shutdown
slot-list Card, list of cards, or range of cards to configure.
all Configures all cards in the chassis.
digit | digit,digit Specifies the slot numbers for cards you want to configure in the chassis.