Filter
Top Products
2-63
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
shutdown
shutdown
Use the shutdown command to disable any of the following:
• A specific interface card or port
• An Ethernet Management port
• An InfiniBand Management port
• A power supply
Enter the
shutdown
command in the appropriate configuration submode. To enable any of these
elements, use the
no
form of this command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Card Configuration (config-card) submode, Ethernet Management Interface Configuration
(config-int-mgmt-ethernet) submode, InfiniBand Management Interface Configuration
(config-int-mgmt-ib) submode, Ethernet Interface Configuration (config-if-ether) submode, InfiniBand
Interface Configuration (config-if-ib) submode, Fibre Channel Interface Configuration (config-if-fc)
submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Enabling/Disabling a card:
Before you use the
action
command on a card, you must enable (bring up) the card. To enable or disable
a card, follow these steps:
Step 1 In User Exec mode, enter the
enable
command to enter Privileged Exec mode.
Step 2 Enter the
configure terminal
command to enter Global Configuration mode.
Step 3 Enter the
card
command and specify the card or cards that you want to enable.
Step 4 Enter the
shutdown
command or the
no shutdown
command to disable or enable the cards that you
specified in the previous step.