Filter
Top Products
6-179
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface mgmt-ib
show interface mgmt-ib
To display the status and address information for the virtual InfiniBand Management port, enter the
show interface mgmt-ib
command in User Exec mode or Privileged Exec mode.
show interface mgmt-ib
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Use this command to verify that you have configured your InfiniBand Management port successfully.
Compare this output to the configuration file and check for discrepancies. You must configure the
InfiniBand Management port successfully to run telnet, SSH, and Element Manager.
Examples The following example displays the status and address information of the InfiniBand Management port:
SFS-7000P# show interface mgmt-ib
===============================================================
Mgmt-InfiniBand Information
===============================================================
descr : Inband Management Port
admin-status : up
ip-addr : 192.168.2.200
mask : 255.255.255.0
gateway-addr : 0.0.0.0
SFS-7000P#
Related Commands gateway
telnet