Filter
Top Products
2-33
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
disable
disable
To exit Privileged Exec mode and return to User Exec mode, enter the
disable
command in Privileged
Exec mode.
To disable a trunk group, enter the
disable
command in Trunk Interface Configuration submode.
disable
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged Execute mode, Trunk Interface Configuration (config-if-trunk) submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Examples The following example exits Privileged Exec mode and enters User Exec mode:
SFS-7000P# disable
SFS-7000P>
The following example deletes a trunk group:
SFS-7000P(config-if-trunk)# disable
Related Commands enable
show interface ethernet