Cisco Systems 7000 Plumbing Product User Manual


 
6-101
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib sm lft
show ib sm lft
Use this command to display the following:
Linear forwarding information based on the block number.
Linear entries that are currently in use by subnet manager.
To display linear forwarding information based on the LID block number, enter the
show ib sm lft
command in User Exec mode or Privileged Exec mode. The command reports only entries that are
currently in use by the subnet manager.
show ib sm lft
subnet-prefix
{prefix |
all
}[lid lid | node-guide guid]
Syntax Description
Defaults This command has no default settings.
Command Modes User Exec mode, Privileged Exec mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
subnet-prefix Subnet prefix of the subnet manager with the status that you want to view.
prefix Displays the linear forwarding table info for a specific subnet or all the
subnets in the fabric.
all Currently, "all" is an alias to the subnet value of the local subnet manager.
lid Local ID of the subnet.
lid Local ID number.
node-guide Guid of the switch node in the subnet with the FDB is to be accessed.
guid Guid number.
Table 6-36 show ib sm lft Command Field Descriptions
Field Description
NodeGuid Guid of the switch node in the subnet with the FDB that you want to access.
LID Local ID of the subnet.
Port Port number.