Filter
Top Products
6-203
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show system
show system
To display the current system global settings, enter the show system command in User Execute mode or
Privileged Execute mode.
show system
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Use this command to verify that the SRP configuration is locked or unlocked.
Examples The following example indicates that the ib counter reset is enabled:
SFS-7000P# show system
================================================================================
System Global Settings
================================================================================
enable ib counter reset : enabled
Related Commands system-mode