Filter
Top Products
7-222
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 7 Diagnostic Commands
source-wwpn
source-wwpn
To configure an optional WWPN identifier for a Fibre Channel interface Echo test, enter the
source-wwpn command in Fibre Channel Interface Diagnostic Configuration submode.
source-wwpn wwpn
no source-wwpn wwpn
Syntax Description
Defaults This command has no default settings.
Command Modes Interface Diagnostic Configuration submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
Examples The following example sets the source wwpn:
SFS-7000P(config-diag-if-fc-4/1)# source-wwpn 20:01:00:05:ad:00:40:00
Related Commands diagnostic
show interface ethernet
show interface fc
show interface gateway
start
stop
test
wwpn Optional 24-bit source identifier to use with the Fibre Channel interface
Echo test.